[Top] [All Lists]

Re: Update on the Disemboweled Midget

To: Spridgets <spridgets@autox.team.net>
Subject: Re: Update on the Disemboweled Midget
Date: Thu, 16 Feb 2006 19:36:09 -0800 (PST)
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=fv4uYyPa4WiF1peunViSnl2mRo1sJkwVBcjKn05H05vtjulTFY838F5hPpL3tMJv4SaOFZQodjwMGeNFOiXPFzbN+8YZFXWoWLmLPf7pgLQ19yhnGf1IR1vW9cHfM0shl5WOrhp/nEmnzbL4hYZp3izt3cGwhV3zp94ylN0BM3s= ;
Everyone's "punch it" method is better than mine - I
drill it out slightly and it just falls out.  But the
punch method has much more margin for error.  I have
to do this very soon, and will use the punch method.

--- bjshov8 <bjshov8@comcast.net> wrote:

> My dad's old trick...
> You get a rod or punch that fits reasonably tightly
> in the bushing, fill the
> hole in the bushing with heavy grease, start the end
> of the punch in the
> hole, then hit the end of the punch with a big
> hammer.  Refill the hole with
> grease as necessary.  The hydraulic pressure of the
> grease acting behind the
> bushing will force it out.
Tired of spam?  Yahoo! Mail has the best spam protection around 

<Prev in Thread] Current Thread [Next in Thread>