[Top] [All Lists]

Re: Update on the Disemboweled Midget

To: "David Lieb" <dbl@chicagolandmgclub.com>, "Spridget List" <spridgets@autox.team.net>
Subject: Re: Update on the Disemboweled Midget
Date: Thu, 16 Feb 2006 10:19:31 -0600
References: <43840a7e0602160242g101bc14dv6742a078288b95da@mail.gmail.com> <039e01c6330d$668c9b00$0ef3bec0@NilesAD.von.gov> <> <03a701c63313$50eea490$0ef3bec0@NilesAD.von.gov> x-avg-checked=avg-ok-566B7D1
At 10:09 AM 2/16/2006, David Lieb wrote:

> > The later, larger is also a needle bearing vs a bronze bushing,
> > making it easier to tell which you have. But if you don't have one,
> > then measure the crank.
> >          PPP
>That would make sense. The Rivergate 5-speed kit comes with the smaller one
>with instructions to request the larger one if it does not fit. Or was it
>the other way around?
>David Lieb
The smaller is common to all 948, 1098, and a majority of 1275s.

boy, is it ever snowing out!
Took over an hour and a half for a 30 minute trip.
Idiot drivers.... lol 

<Prev in Thread] Current Thread [Next in Thread>