[Top] [All Lists]

Re: [Spridgets] Rotor quality problems

To: "K. Valentine" <kevin@valentinephoto.net>
Subject: Re: [Spridgets] Rotor quality problems
From: "Timothy H. Collins" <thcollin@mtu.edu>
Date: Wed, 26 Sep 2007 07:46:15 -0400
Would you classify the failures as electrical (something you could 
measure with a volt/ohm meter) or mechanical (a tolerance defect you 
could detect with a micrometer)??

At 07:33 AM 9/26/2007, K. Valentine wrote:

>On Sep 26, 2007, at 7:00 AM, Timothy H. Collins wrote:
>>I don't understand why you guys experience "out-of-the-box" rotor
>Neither do I.  As you say they are a simple design and they should work.
>Of the three rotor failures I've had, 2 of them were bad out of the
>box.  They just wouldn't work.  The third worked for about 5 minutes
>and quit.
>All of them were Lucas "green box" labeled made in India.
>I've had no problems with other brand and other manufacturer rotors.
>Kevin V.

Tim Collins 

Edit your replies



<Prev in Thread] Current Thread [Next in Thread>