Isn't this the one that you had to tweak to get the hood gaps right?
lester
>
> Well I changed out the shock, no change.
> Then I changed out the top trunnion and pin, no
> change
> So I am changing out the lower A arm, and in
> removing the old A arm, if
> you look real hard and stare real close at it, it
> may, have the
> slightest tweak near the king pin on one side.
> Did I say slight? But I got as far as getting the
> new arm in place and
> the bushing in, I even kicked in the spring but
> tomorrow is another day
> so I'll bolt it all up tomorrow and probably have
> the same issue.
> If so, I take a port-o-power to the shock towers
> and pump and pump, and
> pump until something bends.It's not bent now but
> it's gonna GET BENT!
>
>
>
> --
> Frank Clarici
> Toms River, NJ
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|