spridgets
[Top] [All Lists]

Re: [Spridgets] Spridget tow bar

To: <bushwacker4@zoomtown.com>, "Spridgets" <spridgets@autox.team.net>
Subject: Re: [Spridgets] Spridget tow bar
From: "Brashear, Jack, N" <JNBrashear@garverengineers.com>
Date: Thu, 28 Feb 2008 09:19:24 -0600
Hi All, I have what is probably the simplest tow bar possible for Mk2
and later chrome bumper Spridgets.  Just remove the bumper (two 3/4" hex
nuts) and put the tow bar in its place and replace the hex nuts.  Easy -
and I've been using this for about 35 years.  Oh yes, I've never had any
towing or turning problems.  I have a couple of photos if you're
interested.
Jack

-----Original Message-----
From: spridgets-bounces+jnbrashear=garverengineers.com@autox.team.net
[mailto:spridgets-bounces+jnbrashear=garverengineers.com@autox.team.net]
On Behalf Of bushwacker4@zoomtown.com
Sent: Wednesday, February 27, 2008 11:07 AM
To: Spridgets
Subject: Re: [Spridgets] Spridget tow bar

Does anyone have any thoughts about the geometry of this and the
willingness of the front wheels to follow docilely?

I have used a tow bar many times over the years. They do work if you are
careful, especially going around corners. Your best bet, however, would
be a car dolly or trailer for the distance that you would be covering.
Even more so if you plan all expressway driving.

The main problems with a tow bar are: the wheels remaining turned on the
towed car after negotiating a sharp turn and the towed car will slide
easily on a wet oily road. Don't know why as opposed to a dolly or
trailer but I do know that it will happen. I used to tow bar my race car
and it happened a couple of times. Never has happened with a trailer or
dolly...

Hey, for $50 a day the dolly or trailer rental is a good idea.

--
Kent
1960 Bugeye
1975 Midget - trailerparked queen - soon to be replaced by the latest
acquisition
1973 Midget
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>