3/8th drive works for me and always has. Thought it was what we were supose
to use. shrug.
----- Original Message -----
From: "Frank Clarici" <spritenut@comcast.net>
To: "Jim Johnson" <bmwwxman@gmail.com>; "Spridgets"
<spridgets@autox.team.net>
Sent: Sunday, June 15, 2008 8:25 AM
Subject: Re: [Spridgets] Engine pull
> Jim
>
> Try just the square end of a 3/8 drive ratchet. That usually works.
> The size is probably 7/16" square, so a 1/2" drive ratchet needs to be
> ground down a bit but a 3/8, although loose, works unless the PO torqued
> the hell out of it.
>
> --
> Frank Clarici
> Toms River, NJ
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as jlaird237@cox.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 270.3.0/1501 - Release Date: 6/13/2008
6:33 AM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|