Sounds like you have a geometry problem. Clevis pin too short maybe?
----- Original Message -----
From: "Brad Fornal" <tequila.brad@gmail.com>
To: "Ed's Shop" <shop@justbrits.com>
Cc: "Spridgets" <spridgets@autox.team.net>
Sent: Wednesday, June 18, 2008 8:52 PM
Subject: Re: [Spridgets] Sleeving master/brake cylinders - Stainless vs.
Brass
>I had White Post rebuild my clutch master. I bought a new clutch slave from
> Ed. I have a new flex line, and the line from the master to the frame rail
> is still shiny and new, with no signs of leakage anywhere. I STILL cannot
> get enough pressure to shift gears.
> It looks like our Sprite is staying home from LotO as well....
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|