At 01:54 PM 5/19/2009, Marc wrote:
>Could it be something as simple as the wrong TO bearing? By the
>looks of this
>http://www.aptfast.com/APT_Parts/Aseries_Parts/a_Clutch_Flywheel.htm
>there are two different TO bearings, with the later version
>appearing to be somewhat thinner. Hard to tell exactly from the pictures.
>
>I have two different clutch kits, both correct, however the TO
>bearing from each of them resembles the part show for the 948.
>
>Anyone know definitively?
======================================
Measuring from the center of the pivot pegs to the face of the carbon:
948cc 1/2"
1098 3/4"
1275 .970"
Peter C.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|