spridgets
[Top] [All Lists]

Re: [Spridgets] still no workie...

To: Richard Ball <richb@u.washington.edu>
Subject: Re: [Spridgets] still no workie...
From: Frank <spritenut@comcast.net>
Date: Wed, 14 Oct 2009 18:07:54 -0400
Richard Ball wrote:
>
> Here are the symptoms again.  The engine starts right up and idles fine.
> When you open the throttle the engine RPM increases as it should until about
> 2200 RPM.  At this point any further opening of the throttle causes the
> engine flatten out, bog down, stumble, 

Are you pulling a vacuum off the intake for the vac advance?
Not a good idea.
Not being familiar with the guts of this dizzy, but is the advance plate 
secure or is it floating around.
I just found this problem out on some one else's Sprite he loaned me. 
Talk about variable timing!

-- 
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>