spridgets
[Top] [All Lists]

Re: [Spridgets] Had an OSHIT day

To: Phil Nase <nases@verizon.net>
Subject: Re: [Spridgets] Had an OSHIT day
From: Frank <spritenut@comcast.net>
Date: Sat, 16 Jan 2010 22:48:11 -0500
Phil Nase wrote:
>  The nut and tabbed washer look fine and so
> do the threads on the axle housing.
>
>   
Phil

The tabbed washer should have a bend over tab on it to keep it in place.
OR the left hub has been replaced with a right hub.
The nut should be left hand thread so it does no "undo" when going forward.
If the hub was changed, or the left/right hubs switched at some time, 
this will cause your problem.

-- 
Frank Clarici
Toms River, NJ
My own Fleet of Sprites

_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Suggested annual donation $12.75


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>