If you can avoid running the HDMI through the amp, do so. The Monitor and
the Blue Ray Player have to "shake hands" so to speak. Occasionally, when
there is an intermediary, the signal is lost. The TV will flash a warning
message and will go black. What is happening, is that the TV thinks you are
trying to duplicate the signal, ie burn your own dvd, or save a copy to a
hard drive, or view on more than one screen at a time, all of which are
violations of the copy right on the dvd. The DVD player should have a
digital optical audio output. If your new amp has this capability, use the
HDMI for the video signal only, running straight to the TV, and run the
optical digital cable for the audio channel straight to the amp.
David R.
----- Original Message -----
From: <WeslakeMonza1330@aol.com>
To: <spridgets@autox.team.net>
Sent: Saturday, January 30, 2010 1:27 PM
Subject: [Spridgets] NO LBC - Denon AVR1910 questions
> Hi List,
>
> NO LBC. Currently I have a new 40" TV, a blu-ray player and a very old
> Denon Amp.
>
> I run all my blu-ray/DVD sound to my Amp (TV speakers on mute) and can
> hear
> the difference on a blu-ray to DVD. I can get more volume than I need and
> everything sounds great. Except, the Amp is old and has what appears to
> be an intermittant fault that produces hiss on right hand channel
> (irrespective of what speaker is on it). So I plan to retire the Denon
> Amp and
> replace it with a Denon AVR1910.
>
> Since most of my money that I don't have is going to buy the AVR1910 I'm
> planning on sticking with my 2 current speakers but have a few questions
> to
> anyone that understands this stuff.
>
> I'd like to use the best possible leads which I guess are HDMI. I've
> been
> told I can run an HDMI from the blu-ray to the AVR1910 and then from the
> AVR1910 to the TV. Anyone done that? I'm guessing the AVR1910 ignores
> the
> video signal which it sends on the telly having done 'stuff' with the
> audio
> and shoved it out of my speakers. I can add the only reason this matters
> to me is that I don't want to buy an HDMI lead and not need it.
>
> My existing speakers are very good but old. Can I put any old cheap
> speakers on to the surround outputs to get surround sound (4 speakers) or
> will
> this sound worse than the sound I hear from my existing 2 really good
> speakers?
>
> Any other advice or a full user manual PDF (not the glossy 2-3 page
> brochure) anyone can send me off list?
>
> Final question, any reason to buy the cheaper AVR1610 or more expensive
> AVR2300 from Denon?
>
> Thanks
>
> Daniel
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Suggested annual donation $12.75
>
> You are subscribed as davriker@nwi.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.733 / Virus Database: 271.1.1/2657 - Release Date: 01/29/10
23:35:00
[demime found a multipart/alternative section which it tried
to parse but could not find any section which it could render. Please send
plain text.]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|