spridgets
[Top] [All Lists]

Re: [Spridgets] engine id

To: Mike Rambour <lists@dinospider.com>,Spridgets <spridgets@autox.team.net>
Subject: Re: [Spridgets] engine id
From: Peter Caldwell <peter@nosimport.com>
Date: Fri, 22 Apr 2011 14:19:07 -0500
If there are no tappet covers/side covers under the manifold, then 
it's a 1275.  That's the first place to look.

There're racers who glue side covers on to avoid a "situation"....

Peter C
==

At 02:09 PM 4/22/2011, Mike Rambour wrote:
>  I put in a 1098 into my car, id plate says 8G which is some (Gold 
> Seal whatever that is) replacement engine but 1098.  I have a 
> second motor that I am keeping as a spare that is a 10C motor, so 
> that is also 1098.
>Now, I have a 3rd motor with NO id plates on it and I noticed the 
>head casting is different then my other 2 1098's, not much different 
>but its there.  Without opening up the motor and without id plates 
>on it, how do I identify what it is.  I am guessing its a 1275 but I 
>dont know, it does have a vibration damper on the front instead of 
>plain pulley which is why I guessing 1275 as that would be a later motor.
>
>     mike
>_______________________________________________
>
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/spridgets/peter@nosimport.com
>
>
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 10.0.1209 / Virus Database: 1500/3590 - Release Date: 04/22/11
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>