spridgets
[Top] [All Lists]

Re: [Spridgets] engine id

To: Peter Caldwell <peter@nosimport.com>
Subject: Re: [Spridgets] engine id
From: Mike Rambour <lists@dinospider.com>
Date: Fri, 22 Apr 2011 12:40:57 -0700
  there are no tappet covers so its a 1275, THANK YOU !!!

  That means it can be stored outside as I have no plans for it, along 
with 4 gearboxes :)

     mike


On 04/22/2011 12:19 PM, Peter Caldwell wrote:
> If there are no tappet covers/side covers under the manifold, then 
> it's a 1275.  That's the first place to look.
>
> There're racers who glue side covers on to avoid a "situation"....
>
> Peter C
> ==
>
> At 02:09 PM 4/22/2011, Mike Rambour wrote:
>>  I put in a 1098 into my car, id plate says 8G which is some (Gold 
>> Seal whatever that is) replacement engine but 1098.  I have a second 
>> motor that I am keeping as a spare that is a 10C motor, so that is 
>> also 1098.
>> Now, I have a 3rd motor with NO id plates on it and I noticed the 
>> head casting is different then my other 2 1098's, not much different 
>> but its there.  Without opening up the motor and without id plates on 
>> it, how do I identify what it is.  I am guessing its a 1275 but I 
>> dont know, it does have a vibration damper on the front instead of 
>> plain pulley which is why I guessing 1275 as that would be a later 
>> motor.
>>
>>     mike
>> _______________________________________________
>>
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/spridgets/peter@nosimport.com
>>
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1209 / Virus Database: 1500/3590 - Release Date: 04/22/11
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>