Thanks so very much Jim!
From: bmwwxman . <firstname.lastname@example.org>
To: David Booker <email@example.com>
Sent: Saturday, September 28, 2013 4:07 PM
Subject: Re: Shifter Tower image...
If it is a 3/8" dia bolt then I have the spare for you. It does have some
sort of sensor on it but I doubt that matters for your application. In the
On Sat, Sep 28, 2013 at 3:00 PM, David Booker
Thanks Jim. Yes - number 7 is what I'm missing.
Specifically, the one that is farther forward and lower in the illustration.
The one from my original tranny is a 1/2" thread. The one I'm missing is a
3/8" coarse thread. (we ran a 'known dimension' bolt into the hole, so we know
the size I'm quoting is correct)
> From: bmwwxman . <firstname.lastname@example.org>
>To: David Booker
>Sent: Saturday, September 28, 2013 3:17 PM
Shifter Tower image...
>This might help... It shows exactly what is on
my tranny (not the one with the sensor bolt and wires). Item #7 appears to be
what you are after. They are identical.
>Sprite-Midget Club USA
>High Plains Youth Hockey
>Dodge City Trail of Fame
>Electronic Journal of Severe Storms Meteorology
>Dodge City 300
Sprite-Midget Club USA
High Plains Youth Hockey
City Trail of Fame
Electronic Journal of Severe Storms Meteorology