Moss has them, $10.95 each - ouch! Peter C. probably has them too. 28
threads per inch, BTW. :-)
Sent from my keyboard
> On Jul 20, 2014, at 7:27 PM, Lester <firstname.lastname@example.org> wrote:
> .. and the adjuster screw is hollow and necked, it takes oil from the
> arm and channels it to the top of the pushrod is what it looks like. Where
> would one purchase new ones or are these stock for the 1275?
>> On Jul 20, 2014, at 6:04 PM, Lester email@example.com [bugeye] wrote:
>> I FOUND A PROBLEM!!!
>> May not be the only one but it sure looks like it. When turning the engine
> over with someone else watching the valvetrain it was obvious.. valve
> screw was broken! Found the broken end and was able to remove the bit left
> the rocker arm.
>> The threads are messed up in the rocker arm and if I measure the threads
> the adjuster it's a perfect match for a 27 pitch which just doesn't sound
> right. So oh wise, king, and patient folk, what should it really be..
>> And it was the exhaust valve on #3 so it would push all the compressed
> air/fuel right into the intake manifold.
>> A second set of eyes makes a difference.
>> Thanks for all your help so far folks!
>>> On Jul 20, 2014, at 9:32 AM, Paul Herder wrote:
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums