Sandy,
That CNC Master Cylinder looks quite promising. It should be fine on a
street Tiger (if it fits).The balance bar is cool.
However if you decide to go racing, you may find that you'll need different
size bores to get the front & rear forces close enough to use the balance
bar.
For racing applications we've ended up with a 5/8" front cylinder & a 7/8"
rear.
Buck Trippel
----- Original Message -----
From: "Sandy Ganz" <sganz@pacbell.net>
To: "Curt Bowland" <cbowland@msn.com>; "Tiger Digest"
<tigers@autox.team.net>
Sent: Wednesday, March 26, 2008 5:33 PM
Subject: Re: [Tigers] Master cyl
> While on the master cylinder track, anyone doing anything magical with
> tilton/wilwood/cnc style masters. This would be more for the non-purist. I
> like the tandem masters from CNC, just not sure yet how to fit them up
> with a bracket for the tiger. Here is a link on what I was looking at,
> again, not sure how all the stuff will fit and how the pedal will need to
> be modified.
>
> http://www.cncbrakes.com/mc.asp?grp=mc&subgrp=dcsb&series=717
>
> http://www.cncbrakes.com/mc.asp?grp=mc&subgrp=dcsb&series=718
>
> Looks like a balance bar is already worked into the package the way they
> set it up, or easily done.
>
> Sandy
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|