TR6 DIFF

[john_mcmaster@dpa.act.gov.au]

     Lee,  I've installed a 3.45 diff from a 2500 TC into my '6.  The diff 
     is the same but the mountings are different.  ALL sedans have a 'quill 
     shaft' set up from the front sub frame assembly.  All you need to do 
     is take this shaft from the front and use your existing flange 
     assembly.  You will also need to change the rear cover over as well.  
     
     John Mc
     '71 TR6 PI
     'Fast is First'