Keith,
Add a little grease. I used a small surenge and injected some into mine to
work smoothly.
-jimb
http://www.tyeetriumph.org
Keith Taylor wrote:
> I put new nylon pedal shaft bushings into my TR6 yesterday and now my
> throttle is real sticky. It's as if they're too tight and binding on the
> shaft. It's squeaky, too, but not real loud. Is it OK to take a round
> file to the insides of the bushings to enlarge the hole. I don't want to
> mess them up, they were a bear to get in.
>
> Thanks,
> Keith Taylor
> 1975 TR6
--
## Jim Barbuscia SE Sun Microsystems Kirkland, WA. ##
## http://sunup.West.Sun.COM:80/~jb ##
## Standard Disclaimers apply (Jim.Barbuscia@Sun.COM) ##
|