triumphs
[Top] [All Lists]

RE: TR3 rack and pinion conversion again

To: Gerhard Wiederholl <Gerhard.Wiederholl@t-online.de>, "'George Richardson'" <gprtech@frontiernet.net>
Subject: RE: TR3 rack and pinion conversion again
From: Gernot Vonhoegen <gernot.vonhoegen@stir.ac.uk>
Date: Fri, 25 Sep 1998 11:45:42 +0100charset="iso-8859-1"
Cc: kengano@advant.com, triumphs@Autox.Team.Net
as for xx goes 0049

Gernot

> ----------
> From:         George Richardson[SMTP:gprtech@frontiernet.net]
> Reply To:     George Richardson
> Sent:         Thursday, September 24, 1998 4:43 AM
> To:   Gerhard Wiederholl
> Cc:   kengano@advant.com; triumphs@autox.team.net
> Subject:      Re: TR3 rack and pinion conversion again
> 
> 
> I like the sound of that. Only problem is getting a kit.
> 
> Gerhard Wiederholl wrote:
> > 
> > Hello Ken,
> > 
> > I found  an ad for a rack and pinion conversion kit in our recent
> Triumph club
> > magazin.  I noticed that the kit has been impoved since I saw the ad the
> first
> > time and they state that it now:
> > 
> > needs no service after fitting
> > can be used with original horn and direction indicator equipment
> > can be used with a adjustibe steering shaft
> > can be used with original fan or electric-fan
> > needs no modifications on frame and body
> > 
> > One of our club members tried it out and he wrote an article about it.
> As I
> > remember he stated that steering became very easy and that he liked the
> > possibility to put back the original parts any time he likes (all bolted
> on).
> > 
> > The company is called:
> > 
> > Car Trim Handels- und Service-Gesellschaft für klassische Automobile und
> Teile
> > mbH,
> > In der Lei 19a,
> > 65527 Niedernhausen
> > Germany
> > 
> > Tel. XX (0) 6128/73512    XX ...country code for Germany to find out
> > Fax. XX (0) 6128/73513    0.....omit when calling from outside Germany
> > 
> > No financial interest as usual.
> > 
> > Regards
> > 
> > Gerhard Wiederholl, Germany
> > 
> > Gano, Ken schrieb:
> > >
> > > Several months ago there was a thread about an English (or maybe
> German)
> > > company selling a bolt up rack and pinion steering conversion for the
> > > TR3.  I need to contact that company and have deleted the thread.
> Does
> > > anyone have an address.  I remember seeing an advertisement about the
> > > same time but can't find that now either.  Any help would be
> > > appreciated.
> > >
> > > Ken Gano
> > > kengano@advant.com
> > > "more time than money and more money than good sense"
> 
> -- 
> George Richardson
> '57 TR3, TS15559L - painting and reassembling....
> http://www.merlingroupinc.com/tr3.htm
> 

<Prev in Thread] Current Thread [Next in Thread>