One of you TR6 guys answer this? I don't know, myself. Cheers.
In a message dated 98-11-04 15:21:01 EST, email@example.com writes:
> Is this the same for a TR6?
> > -----Original Message-----
> > From: ArthurK101@aol.com [SMTP:ArthurK101@aol.com]
> > Sent: Tuesday, November 03, 1998 7:52 PM
> > To: EHamer@vhsinc.com; firstname.lastname@example.org
> > Subject: Re: TR4 oil pressure
> > In a message dated 98-11-03 12:51:32 EST, EHamer@vhsinc.com writes:
> > > I had the same thing happening with my TR4. The oil pressure would
> > > about 15 psi at about 3,000 rpm. It was caused by a worn oil pressure
> > > relief spring. Apparently the spring coils become detempered with
> > > age/heat. The pressure should be set to 70 psi at 2,000 rpm when the
> > > engine is fully warmed from driving. The spring is available from TRF
> > > and Moss and is only a couple of dollars and can be installed in about
> > > five minutes.
> > >
> > > John Hamer
> > I'll second that. Cheap and an easy repair. It works. Cheers.
> > Art Kelly