Message text written by Cliff Hansen
>I've puzzled over this. Since the mainshaft is moving back with
>the tail housing, it seems that the rear bearing may be seized to the
>shaft.<
It seems to be seized enough for me! I hope find a puller with enough
strength for the job, plus a length of 12" or so. Maybe one of the tool rental
companies.....
I hit the output shaft and bearing with penetrating oil, but nothing. How hard
is it supposed to be to get this thing to move??? I have a _heavy_ rubber
hammer, and
I used a 2x2 wood stick on end to pound on. Nothing moved afer the first 1/8"
of tail housing
travel and 1/4" of tail shaft travel.
-Tony
|