Re: Removing Transmission tail housing (TR4)

[Tony Rhodes <ARhodes@compuserve.com>]

Message text written by "Brian Sanborn"
>Good luck.... just be methodical, keep clear notes and pictures and keep
very close attention to the Haynes instructions<

Thanks.

I will get a brass head hammer (have to figure out where!)
Could not find a puller with more than 8" draw.  This needs about 10+ inches.

I have a big rubber mallet, and will try that on the wings.  Just does
not seem to want to move after the first 3/8"

I plan on meing very methodical too, hopefully.

-Tony