tr6 clutch low grab

[CarlSereda@aol.com]

<<> I have a 1969 TR6 project that I have owned for 9 years, that I have just
> replaced the clutch in. While I was at it I rebuilt the Master Cylinder and
> the Slave Cylinder. Now, the problem is that when I bring my foot up off the
> floor it grabs right there.>>
ona TR4s you have to adjust the rod coming out of the clutch slave cylinder 
for .010 play by adjusting the rod nut - I wonder if yours is similar set-up 
and simply needsthat simple adjustment.
Carl
'64 TR4 since '74