Are you saying that the bracket that is mounted on the inner wells is either
outboard or inboard to the corresponding cross piece on the apron?
Could there have been a change of placement at re-tooling? What is your
commish#?
Carl
-----Original Message-----
From: Ken Gano [mailto:triumphs@mcleodusa.net]
Sent: Friday, October 01, 1999 12:22 AM
To: triumphs@autox.team.net
Subject: TR3A picture needed
I spent the evening reinstalling the front apron. I feel
like I have a very
nice fit, except the front, top attachment points (where the
bowed piece of
square tubing bolts through the brackets on the inner fender
wells). There
is a full and uniform inch between the holes in the apron
and the holes in
the mounting brackets. Otherwise, it fit up fine and very
square.
Can anyone direct me towards a good picture. I am wondering
if there is
some sort of spacer in here I am missing. The closest
picture I can find is
page 23 of Piggott 1st edition and it appears to be as I
remember, that
being that the apron and the brackets bolt directly
together. My only other
option is to fit the hood and see how the curve looks, but a
picture could
save a lot of grief.
TIA
Ken Gano
|