| Subject: | Re: Question re: TR6 brake hazard switch leaking |
|---|---|
| From: | Randall <randallyoung@earthlink.net> |
| Date: | Sat, 15 Apr 2000 15:27:25 -0700 |
| Cc: | triumphs@autox.team.net |
| References: | <31547382.955836355231.JavaMail.imail@magic.excite.com> |
Steve : Odds are, only the switch is bad. It might even be as simple as a bad seal between the switch and the PDWA, but IMO a bad switch is more likely. Randall Steve Skolnik wrote: > > A technical question that doubtless many of you can answer with little > thought: As brake fluid is leaking (slowly) from the nylon brake hazard > switch mounted on the pressure equalizer block (or whatever you call it), > does this mean that the seals in the pressure equalizer are bad, or just the > nylon switch itself? |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Question re: TR6 brake hazard switch leaking, Steve Skolnik |
|---|---|
| Next by Date: | Re: NON LBC PC hacking, Graham Stretch |
| Previous by Thread: | Question re: TR6 brake hazard switch leaking, Steve Skolnik |
| Next by Thread: | RE: Question re: TR6 brake hazard switch leaking, Jim Altman |
| Indexes: | [Date] [Thread] [Top] [All Lists] |