triumphs
[Top] [All Lists]

RE: TR 3 rear seat - scanner & website needed

To: "'Don Marshall'" <marshall@nefcom.net>, "'triumphs@autox.team.net'" <triumphs@autox.team.net>
Subject: RE: TR 3 rear seat - scanner & website needed
From: Chris De Wet <DeWetC1@sapo.co.za>
Date: Mon, 17 Apr 2000 11:47:58 +0200
Importance: highcharset="iso-8859-1"
Don
Sorry no scanner or website available , but a Photostat copy of the article
would be highly appreciated .
Kind regards
Chris de Wet
PO Box 472 , Ifafi , 0260 , South Africa
Fax 012 - 3398118
One '56 TR 3 with o/d , two Heralds and four early Spitfires without o/d .

-----Original Message-----
From: Don Marshall [mailto:marshall@nefcom.net]
Sent: Thursday, April 13, 2000 2:53 PM
To: Chris De Wet; 'triumphs@autox.team.net'
Subject: Re: TR 3 rear seat - scanner & website needed


At 04:26 PM 4/4/00 +0200, Chris De Wet wrote:

>Could anyone please provide me with some information regarding the fitment
>of an occasional rear seat in a 1956 TR 3 .  TS 10795 was acquired by me
>with the occasional rear seat loose / unbolted in the back .

Listers...

I have a long article from some old newletter that describes how to make
and install an occasional seat for the TR3s.  I have it in my fax software
now, but have no way to convert it to JPEG or other format that could be
put on a website.  I also don't have a website.  

I could fax it directly to Chris in South Africa, but then he'd be the only
other one with it, and there seems to be some wider interest on the list.
If someone would convert it and post it somewhere for everyone that would
probably be better.  Let me know if you have the capability and I'll fax it
to you (preferably in the US of A).  

Thanks...
Don Marshall




The information contained in this e-mail including any attachments is
privileged and/or confidential.  If you are not the intended recipient
please reply immediately and delete this message.  Please do not make use of
it, nor disclose it's contents in any way.  Thank you. 



<Prev in Thread] Current Thread [Next in Thread>