Pat :
Most likely they are the same. If you don't get both slave cylinders
off the same car, check the piston diameter. There were several
different diameters used, which are interchangeable in sets, but should
not be mixed.
Randall
Pat wrote:
>
> The running frame of my TR3 is "around" a 1962 or so and are Girling... I
> need a rear brake drum and cyclinder, was wondering if the drum(s) off my
> TR4A "IRS" parts car will fit ?
>
> I just measured the drum on my 3 down stairs.. it is 9 3/4" wide out side
> (not including the flange) and 1 3/4" wide (Will that be the "normal" 9" x
> 1 1/4" if measured inside ?)
>
> Also, will the TR4 A "IRS" brake cylinders (drum) be the same
>
> Thanks, Pat
|