Pat :
TR2/3/3A/3B do not use the shims in the front suspension. There is no
adjustment for caster or camber, toe-in is set by turning the tie rods.
The brass bushings in the outer end of the lower wishbones will need to
be reamed (5/8" as I recall), if they have been replaced. IMO, they
should always be replaced.
Randall
59 TR3A daily driver
Pat wrote:
>
> I've heard (via the list) about the need for Shims on "A" arms... as I'm
> about to do my Front Susp this week does the TR3 use shims to align the
> upper and lower "A" (Wishbone) arms ?
>
> Do I need to, and if so how do I align what I need to align ? (Yes I read a
> manual but it does not mention it).
>
> I also heard the need to ream out the new bushings where the trunnions go in
> to.. is this so ?
>
> Thanks, Pat
|