> > According to the manual, the rotor arm should be roughly aligned
> > toward the no. 1 push rod when the no. 1 piston is at TDC.
>
> Aha! The rotor arm should point at the no. 1 spark plug's tower on the
> distributor cap, not at the spark plug itself!
That's partly true, but on a TR2-4 engine, the correct (rough) distributor
alignment is with the #1 plug contact on a line between the shaft and the #1
(exhaust) push rod tube on the head. I believe the manual section being
quoted is discussing the installation of the dizzy, so it's tough to use the
dizzy as a reference ...
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|