>Dear List,
>
>Have any of you successfully used an Eezibleed on an early Spitfire
>brake or clutch master cylinder? If so, did you use one of the caps
>that came with the kit or make one with an old cap. I get leaks either
>way I try and I'd appreciate any hints you can give me.
>
Used it on Midget, Europa, 626, RX7, and many other cars, both with the caps
supplied by Gunson and with modified stock caps. No serious problems.
How much pressure are you using? You only need 5-10 psi. Be sure to
pressure-test
the system before you put fluid into the bottle.
Phil Ethier
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|