I had the same problem. Use a welder or take it
to a welder. Weld a large nut to the stud. This
heats the stud and not the manifold. The difference
in temp will break the bond. You just put a wrench
on and twist it out.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Brian Borgstede !
Distance Learning Engineer !
University of Missouri - St. Louis ! '68 Triumph TR-250
Phone: (314)516-6433 ! (or two or more)
Fax: (314)516-5294 !
Email: borgstede@umsl.edu !
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|