Hello Pete. If you still have the point in. Make sure you have that plastic
sleeve in correctly. Which insulate the stud from the condenser and hot lead
into the points. Or your point will be grounded. Take the cap off. Key on.
And by hand. Open and close the points. You should get a spark. Without
shocking your self to death. Good luck John, Flintstone, GA
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|