Where did you get the shaft that has the grooves for the
circlips? Wouldn't mind having one of those myself.
> Date: Mon, 18 Feb 2002 19:47:24 -0800
> From: "Brad Eells" <firstname.lastname@example.org>
> Subject: RE: TR3 Fuel Pump
> Go with the dropping the pan option. Not only do you have the pump lever
> down there, you have about 6 washers that may have slipped off the pump
> This problem happened to me several times as the pump shaft is pressed in on
> some models of the pump and have a tendancy to work their way out. I finally
> acquired a pump shaft that has a circlip on each end.
> I rebuilt the pump at least twice by the side of the road. The next time I
> had the sump off...it was full of washers!
> JB Weld or Loctite Red would be the next best thing if you can't find a
> shaft with circlips!
/// email@example.com mailing list
/// To unsubscribe send a plain text message to firstname.lastname@example.org
/// with nothing in it but
/// unsubscribe triumphs
/// or try http://www.team.net/cgi-bin/majorcool