My TR6 clutch actuation is rather unpleasant. It is not possible to let it
out without the pedal binding on its way up. This makes starting up from a
standstill rather untidy. It feels like the bushing is binding on the
shaft. I've tried the oil / WD40 treatment even though I know that's the
wrong thing to do on composition bushings on steel shafts.
Has anyone had experience fixing this without removing the whole darned
pedal assembly from the car?
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|