Patrick,
Did you rebuild the wheel cylinders or just the master cylinder? If they
are gummed up, stuck or whatever, you might not get any fluid past them.
Bob
> Well once again I reached a dead end. I replaced my master brake cylinder
> and tired to bleed my brakes. Then I noticed that my fluid level wasn't
> going down. Then I looked in the jar of this one man bleed kit, and it was
> empty. Pumped some more and no dice. I removed the lines to the MBC and
> pumped the brakes and fluid came out. I removed the PDWA and blew into the
> lines and there was air passing thru. Brakes seem to be a straight forward
> thing. Pump and watch the fluid come out.
>
> Can anyone tell me what can the problem be?
>
> Thanks,
>
> Patrick
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|