> Maybe I've just put up with for so long so I think that
> Standard Triumph
> designed the choke cable that way, but, mine is loose and
> won't stay out
> after pulling on it. The springs at the carbs pull the cable
> back so I end
> up hanging on to it to keep the mixture rich while the engine
> is cold. I
> seem to remember doing this since I first got the car in 1970.
I don't know if it's the same for the TR4A, but for the TR6 you twist the
choke knob (say) a quarter turn (either direction) when you pull it out to
lock it in position. I imagine Triumph didn't think that up just for the TR6
and later models...
Hope this helps,
Frank Biedermann
69 TR6 PI
Adelaide
AUSTRALIA
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|