Where's Fred with his recomendation for poweder coating?
I plan to do that next time I've got the drums off. I'll be using black
though.
Bill & Skip Pugh wrote:
> I used the two part epoxy Red from Eastwood on Casper, and it ends
> up with a glass smooth finish...I don't autocross as much as Joe but
> after going down several steep mountain passes it is still a glass
> smooth bright red...it takes several coats but each coat makes the
> finish better and better. There was enough in the Kit to do
> the calipers and the drums on Casper (1957 TR3)
>
>
>> I painted my GT6 Drums Bright Red with regular Krylon paint and even
>> with hard autocross braking, the red is still intact.
>>
>> Joe
>>
>> I'm going to paint the drums on the GT6. Do I need a high temp paint?
>> Anyone
>> have any Recommendations?
>> Thanks
>>
>> Ken Copeland
>
>
>
--
George Richardson
1957 Triumph TR3 - TS15559L http://www.key-men.com/triumph
1975 Triumph TR6 - Undergoing restoration
1972 Triumph Stag - Daily Driver
Key Men: Keys for Classics - http://www.key-men.com
|