Hi Chip
The clearance is 0.002 inch (2 thousandths) not 2 millimetres, this would
rattle well, or have I missed something in the US English to UK English?
Graham.
----- Original Message -----
From: <Chip19474@aol.com>
Subject: Re: TR-6 Rear Hub (Longish)
> In a message dated 2/27/2004 4:18:38 PM Eastern Standard Time,
> technical@iwnet.screaming.net writes:
> > I first did mine using a dial gauge and set the 0.002" float, after a
few
> > miles (10-20) the bearings were really loose and I then asked for help
and
> > was told to do the method described here.
> >
>
> Dennis,
>
> Ditto for me.....we ignored the 2 mil spec and all is fine
>
> Chip Krout
> Skippack, PA USA
>
> 1976 TR6 #CF57822U - "CHP 75R" (Coventry {CHP} Build Date July 5 {75},
1976
> {R}) - one of the last 500 built!
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.596 / Virus Database: 379 - Release Date: 26/02/2004
|