Hi Bill,
I use chassis grease. Never had a problem.
Hold the anti-rattle spring and that pesky little pin in place with a blob
of grease. Then just carefully position the shifter and push it in.
Cheers,
-Rick
1973 Triumph TR6 CF2570U
>What kind of grease or lubrication should be added to the shift lever at
>various points, such as in the retainer and cap, at the bottom of the ball,
and
>where the lever contacts the shift forks? I'm installing an anti-rattle pin
and
>spring (neiter was in place, and my shift lever rattled loudly when
>accelerating after shifting). Any tips for installing the anti-rattle
spring?
|