Hi Bill
I just use whatever is in the grease gun, or tin I haven't re-filled the gun
from!
A top for fitting the anti rattle spring, stick it and the plug in with
plenty of grease, and if you remove the stick later down the road, unless
you are lucky or careful you will loose this spring and plug too!
Graham.
----- Original Message -----
From: <MotoPsyche@aol.com>
Subject: Lubrication for Gear Shift Lever
> What kind of grease or lubrication should be added to the shift lever at
> various points, such as in the retainer and cap, at the bottom of the
ball, and
> where the lever contacts the shift forks? I'm installing an anti-rattle
pin and
> spring (neiter was in place, and my shift lever rattled loudly when
> accelerating after shifting). Any tips for installing the anti-rattle
spring?
>
> Spring...you have to love that word...
>
> TIA,
>
> Bill Stagg
> 1960 TR3A
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.600 / Virus Database: 381 - Release Date: 28/02/2004
|