triumphs
[Top] [All Lists]

Re: Fan and pump housing

To: John Gillis <jgillis@gemini.tcd.ie>
Subject: Re: Fan and pump housing
Date: Mon, 15 Nov 2004 16:18:02 -0500
Cc: triumphs@Autox.Team.Net
References: <a05210600bdbe2af8465c@[134.226.9.58]>
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.1) Gecko/20020826
John Gillis wrote:
> Two questions for the "combined wisdom", can I fit a TR4 cooling fan to 
> my TR2, i.e the one with 4 blades and square ends. My original is a bit 
> bashed with the aluminium fins chipped and a little distorted. I see a 
> TR4 fan on E-Bay and the price of a new replacement from Moss is over 
> 100euro. Or if anyone out there has a nice straight one they would like 
> to sell?. Secondly my housing for the water pump spindle (the casting 
> that bolts to the block) is very flaky on the inside due to corrosion. I 
> am also trying to locate a half decent one of these, the item from the 
> TR250/6 looks similar, is it?, again one on E-Bay and again if anyone 
> has one lying around???.
> Regards
> John

John,

I have a tr4 fan on my 3a. works fine. I dont have a spare of either 
type. I installed the 4 type fan because my 3 type was in bad shape, it 
hit the rad with the previous owner!

Bob Labuz

1958 TR3A
1974 T140V
1998 T-Bird T-3




<Prev in Thread] Current Thread [Next in Thread>