GT6: Thrust Wshr. Measurement?

[Dave Massey <105671.471@compuserve.com>]

Message text written by "M. Secrest"
>What crank endfloat play is in the acceptable range for this, and what's
the best way to do the measurement?  There is almost no clearance
between the rad and the crank pulley on my car.
<

If the GT6 is like the TR6, the book value is .005 to .007 (I think)  At
any rate, if you measure .015, start makeing plans to drop you pan (less
trouble than tropping tranny).

Dave