triumphs
[Top] [All Lists]

RE: TR3A seat stability

To: "'mandrews53@earthlink.net'" <mandrews53@earthlink.net>,
Subject: RE: TR3A seat stability
From: "McEwen, Art" <Art.McEwen@moh.gov.on.ca>
Date: Thu, 13 Jan 2005 09:51:40 -0500
It's not the bottom cushion that's the problem but instead it's the back
that's holding itself stiff enough.

-----Original Message-----
From: Michael Andrews [mailto:mandrews53@earthlink.net] 
Sent: Thursday, January 13, 2005 12:35 AM
To: McEwen, Art; triumphs@autox.team.net
Subject: RE: TR3A seat stability

a cheap and easy experiment is to cut blocks of flexible foam and slide
them inside the springs of the seat . You can adjust the give of the seat
with the height of the block . I'd also put stiffer ones in the springs
next to the door. The passengers always think they are going to be flung
out of the car if that side is soft. What can I say worked for me, Mike
TR2inLA


> [Original Message]
> From: McEwen, Art <Art.McEwen@moh.gov.on.ca>
> To: triumphs@autox.team.net <triumphs@Autox.Team.Net>
> Date: 1/12/2005 8:41:58 AM
> Subject: TR3A seat stability
>
> I was wondering if the list has any advice without opening up the Miata
seat
> debate ;)  I personally find the TR seats comfortable but the more
> important/influential factor is that my wife does not.   
>
>  
>
> After riding in the passenger side I can see her point, because the
> passenger seat back is hinged and not stiffly attached to the base like
the
> drivers side there's a side to side wobble that you're constantly fighting
> against with your back muscles.   The buckets are old but appear solid and
> the nuts and pins where they hinge appear tight, and anyway it appears to
be
> the metal back that's twisting not the attaching points.  
>
>  
>
> The only thing I can think of would be to: 
>
>  
>
> a)     Spot weld the bucket to the base making it stiffer but preventing
it
> from hinging (not my first choice).
>
> b)     Fabricating some sort of sheet steel brace in the same shape as the
> curve of the seat back and welding it to the back of the bucket (under the
> seat fabric) to provide a stiffer material.
>
>  
>
> Any other suggestions?
>
>  
>
> Art McEwen 




<Prev in Thread] Current Thread [Next in Thread>