Sorry, should have noted that these are the stock REAR springs only.
Chris
----- Original Message -----
From: "Chris Bohn" <cbohn@sidepipe.com>
To: "Don Malling" <dmallin@attglobal.net>; "6-Pack" <6pack@autox.team.net>;
<triumphs@autox.team.net>
Sent: Friday, January 28, 2005 2:46 PM
Subject: Re: Spring height TR250 TR6
Don,
I've got a genuine NOS set of TR250 springs, which are identified by being
painted black with white and
green brush marks on each ring. They measure 11.5 inches.
Chris
----- Original Message -----
From: "Don Malling" <dmallin@attglobal.net>
To: "6-Pack" <6pack@autox.team.net>; <triumphs@autox.team.net>
Sent: Friday, January 28, 2005 1:21 PM
Subject: Spring height TR250 TR6
Does anyone know where/how I can determine or find the unloaded height of the
stock front and rear
springs for a TR250 or TR6.
I have purchased a set of new 20% uprated springs for my TR250. The fronts are
the same height as my
original stock front springs but the rears are taller than my originals. Seems
funny to me. The
vendor has suggested that my rears have sagged, which I kind'a doubt, or at
least wonder about.
At any rate, if I could check the height of my original rear springs, I would
like to.
Seems to me I checked in Bentley and it wasn't there.
Thanks,
Don Malling
|