triumphs
[Top] [All Lists]

RE: TR4/4A Lighting Switch (back to flash-to-pass?)

To: <triumphs@autox.team.net>
Subject: RE: TR4/4A Lighting Switch (back to flash-to-pass?)
From: "Randall" <tr3driver@comcast.net>
Date: Thu, 3 Mar 2005 23:17:00 -0800
> Brown is supposed to connect to green/brown going to the fuse box, BUT there
> is no green/brown wire at the fuse box, and the only green/brown off the
> harness at the switch goes to the flasher, and therefore connects to the
> signal switch.  So where the hell does brown go!!!

Personally, I'd be tempted to connect the brown wire together with the
brown/blue.  That will feed the flash-to-pass contacts with the same unfused,
unswitched supply that the headlights normally get.

Never did make any sense to me why the normal headlight circuit was unswitched &
unfused, but the flash-to-pass was both.  Maybe someone at the factory noticed
the same thing, and deleted the extra supply wire.

Randall




<Prev in Thread] Current Thread [Next in Thread>