I have a battery charger that I use on my bench as a 12VDC source. However,
I only use it to check out the various lights, motors, etc. for the TR250 as
I rebuild and test them prior to installing them on the car!
It works fine for me.
Of course, YMMV!!
Jim Bauder
'68 TR250, CD47L
TR web site: http://www.triumphowners.com/647
Scottsdale, AZ
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Doug Mathews
Sent: Thursday, September 22, 2005 4:58 PM
To: triumphs@autox.team.net
Subject: 12V source
Hi all,
Once in a while I need a 12v source at the work bench and I know I
could simply tap a battery, but I'm looking for something I could
simply "switch on" at the work bench. Nothing I can imagine right now
would require major amps. I was wondering if I could use a battery
charger as a power source, or is there a better solution.
I know someone out there has an answer! :-)
Thanks,
Doug
|