Sticky Carb follow up

[aledotr6@aol.com]

Thanks to all who responded. It seems the binding was between the dome and the 
piston, not the piston and the carb body. I unscrewed the piston from the 
diaphram so it could rotate freely and found that moving it 90 degrees freed it 
up. Re-tightened and it seems to be OK. Still marginally less free than the 
other, but if I had nothing to compare to, I would think it was normal.
 
Bud Trussell


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org