In a message dated 10/25/2005 1:46:48 PM Central Standard Time,
vinttr4@geneseo.net writes:
> I want to replace the window glass channels on my TR6.
>
> Must I remove the window glass to do this?
>
> Must I replace the inner and outer seals at the door slot?
>
It's been so long since I replaced mine that I forgot, but I think you can.
The channels are held in place by some brackets. Once those are loose they
can be withdrawn away from the glass and then maneuvered around and removed
from
the door cavity via an opening hidden by the trim panel. This may be doable
with the window rolled mostly or all the way up. Certainly worth a try.
I know it is easier on the TR3.
Dave
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|