john,
Here's and artocle from Popular Mechanics on resitance in spark wires.
http://tinyurl.com/qlt84
Doug
At 08:22 AM 3/19/2006, you wrote:
> I was going though old sets of spark plug wires from my TR6 and
> was looking at the resistor ratings. I have some that are just
> copper core with 0 resistance, some of the older repro sets from
> TRF that say 16K but measure out at more like 4K. I also have a
> NOS set of Ripaults that say 15K and measure exactly that, and
> another repro set from an unknown source that says 25k Ohms. I
> cant find what should be correct for my 76. I've used the copper
> core set(0 ohm) with no noticable radio interference. Would this
> be the best set for performance or does it really make any
> difference. Thanks for any insights. John Mitchell
>76 TR6
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|