Howdy all! I'm putting a set of securon inertial reel shoulder belts in
my 250 and would love some advice. I know on cars that had lap belts,
the outside bottom portion of the lap belt bolted through the b-pillar.
I'd rather not drill through the b-pillar. Any reason why the outboard
attachment point (i.e., the point next to the door, rather than next to
the transmission tunnel) can't go through the floor? Thanks as always!
NOTICE: This communication may contain privileged or other confidential
information. If you are not the intended recipient, or believe that you have
received this communication in error, please do not print, copy, retransmit,
disseminate, or otherwise use the information. Also, please indicate to the
sender that you have received this communication in error, and delete the copy
you received.
IRS CIRCULAR 230 Disclosure: Under U.S. Treasury regulations, we are required
to inform you that any tax advice contained in this e-mail or any attachment
hereto is not intended to be used, and cannot be used, to avoid penalties
imposed under the Internal Revenue Code.
Thank you.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|